Category: 2879-20-1

As a common heterocyclic compound, it belong benzodioxans compound,1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone,2879-20-1,Molecular formula: C10H10O3,mainly used in chemical industry, its synthesis route is as follows.,2879-20-1

General procedure: A series of sixteen novel 1, 4-benzodioxane-based thiosemicarbazones(3a-p) was synthesized by reacting appropriatethiosemicarbazide (1a-p) (5 mmol) and 1, 4-benzodioxan-6-ylmethyl ketone (2) (5 mmol) in methanol (15 mL) using glacialacetic acid (1e2 drops) as catalyst. Reflux at 80 C for 6 h wascarried out and the product formation and the reaction completion were examined by thin layer chromatography. Upon completion,the reaction mixturewas allowed to cool at r.t and the solid productwas collected by suction filtration followed by washing with hotmethanol and then dried in vacuum. Finally, the target thiosemicarbazonesderivatives were recrystallized from chloroformmethanolmixture (1:1) in good to excellent yields. The X-raymeasurements were read by mounting a 3m single crystal on agreased MiTe Gen loop and was inspected through thediffractometer (Bruker D8 Venture APEX diffractometer) at 296 (2)K by means of graphite-monochromated MoeK a radiation(l 0.71073 A); diffractometer was complimented with an areadetector (Photon 100 CCD) along with a cooler (Oxford Cryostream).APEX-II software was used to collect Data [41] and SAINTwas operated for integration [42] The SADABS (multi-scanapproach) was used for correction in absorption [43]. and intrinsicphasing (SHELXT)was employed to the solve the structure [44]. Fullleast squares refinement of all detected reflections were used todetermine the final cell constants and assign positions of all atomsother than H to the consequential difference maps via refinementagainst F2. Whereas H atoms were assigned location and addedagainst F2 and were refined by riding model. SHELXL-97 wasimplemented to refine anisotropically [45]. The CCDC (CSD depositionnumbers 1874544) of the structure has been deposited. Thedetailed characterization of compounds 3a e 3p are given insupporting informations.

With the synthetic route has been constantly updated, we look forward to future research findings about 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone,belong benzodioxans compound

Reference£º
Article; Shehzad, Muhammad Tariq; Khan, Ajmal; Islam, Muhammad; Hameed, Abdul; Khiat, Mohammed; Halim, Sobia Ahsan; Anwar, Muhammad U.; Shah, Syed Raza; Hussain, Javid; Csuk, Rene; Khan, Samra; Al-Harrasi, Ahmed; Shafiq, Zahid; Journal of Molecular Structure; vol. 1209; (2020);,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone, cas is 2879-20-1, it is a common heterocyclic compound, the benzodioxans compound, its synthesis route is as follows.

The specific steps are: Add compound 10 (0.5 mmol) to a 38 mL pressure tube. After iodine (0.25 mmol) and 2 mL of DMSO were subjected to a first reaction at 100 C for 90 min, 2-aminobenzonitrile (0.4 mmol) was added to the reaction mixture. KHS¡¤H2O (1 mmol) was subjected to a second reaction at 90 C, after 20 hours, The reaction mixture was extracted with ethyl acetate. The organic layer was washed with saturated sodium sulfate The solvent is distilled off under reduced pressure to obtain a crude product. Crude products with petroleum ether and ethyl acetateThe mixture is purified by column chromatography to obtain a yellow liquid. The total yield was 69%., 2879-20-1

As the rapid development of chemical substances, we look forward to future research findings about 2879-20-1

Reference£º
Patent; Central China Normal University; Geng Xiao; Wu Xia; Wu Yandong; Wu Anxin; (15 pag.)CN109232366; (2019); A;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

As a common heterocyclic compound, it belongs to benzodioxans compound, name is 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone, and cas is 2879-20-1, its synthesis route is as follows.,2879-20-1

General procedure: Equimolar quantities of substituted benzaldehyde and 1-(2H-1,3-benzodioxol-5-yl)ethan-1-one or 1-(2,3-dihydro-1,4-benzodioxin-6-yl)ethan-1-one were dissolved in 40% KOH and ethanol. The reactionmixture was then stirred for 10 h and poured into ice-cold water. Theprecipitated product was washed with water, dried, and recrystallizedfrom ethanol.

With the complex challenges of chemical substances, we look forward to future research findings about 2879-20-1,belong benzodioxans compound

Reference£º
Article; Parambi, Della Grace Thomas; Oh, Jong Min; Baek, Seung Cheol; Lee, Jae Pil; Tondo, Anna Rita; Nicolotti, Orazio; Kim, Hoon; Mathew, Bijo; Bioorganic Chemistry; vol. 93; (2019);,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

As a common heterocyclic compound, it belongs to benzodioxans compound, name is 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone, and cas is 2879-20-1, its synthesis route is as follows.,2879-20-1

General procedure: A series of sixteen novel 1, 4-benzodioxane-based thiosemicarbazones(3a-p) was synthesized by reacting appropriatethiosemicarbazide (1a-p) (5 mmol) and 1, 4-benzodioxan-6-ylmethyl ketone (2) (5 mmol) in methanol (15 mL) using glacialacetic acid (1e2 drops) as catalyst. Reflux at 80 C for 6 h wascarried out and the product formation and the reaction completion were examined by thin layer chromatography. Upon completion,the reaction mixturewas allowed to cool at r.t and the solid productwas collected by suction filtration followed by washing with hotmethanol and then dried in vacuum. Finally, the target thiosemicarbazonesderivatives were recrystallized from chloroformmethanolmixture (1:1) in good to excellent yields. The X-raymeasurements were read by mounting a 3m single crystal on agreased MiTe Gen loop and was inspected through thediffractometer (Bruker D8 Venture APEX diffractometer) at 296 (2)K by means of graphite-monochromated MoeK a radiation(l 0.71073 A); diffractometer was complimented with an areadetector (Photon 100 CCD) along with a cooler (Oxford Cryostream).APEX-II software was used to collect Data [41] and SAINTwas operated for integration [42] The SADABS (multi-scanapproach) was used for correction in absorption [43]. and intrinsicphasing (SHELXT)was employed to the solve the structure [44]. Fullleast squares refinement of all detected reflections were used todetermine the final cell constants and assign positions of all atomsother than H to the consequential difference maps via refinementagainst F2. Whereas H atoms were assigned location and addedagainst F2 and were refined by riding model. SHELXL-97 wasimplemented to refine anisotropically [45]. The CCDC (CSD depositionnumbers 1874544) of the structure has been deposited. Thedetailed characterization of compounds 3a e 3p are given insupporting informations.

With the complex challenges of chemical substances, we look forward to future research findings about 2879-20-1,belong benzodioxans compound

Reference£º
Article; Shehzad, Muhammad Tariq; Khan, Ajmal; Islam, Muhammad; Hameed, Abdul; Khiat, Mohammed; Halim, Sobia Ahsan; Anwar, Muhammad U.; Shah, Syed Raza; Hussain, Javid; Csuk, Rene; Khan, Samra; Al-Harrasi, Ahmed; Shafiq, Zahid; Journal of Molecular Structure; vol. 1209; (2020);,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

As a common heterocyclic compound, it belongs to benzodioxans compound, name is 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone, and cas is 2879-20-1, its synthesis route is as follows.,2879-20-1

General procedure: To 1-(2,3-dihydrobenzo[b][1,4]dioxin-6-yl)ethan-1-one(A) (1 mmol) alcohol solution (5 mL) was added substituted benzaldehyde(1 mmol). After dissolution, 50% NaOH (0.5 mL) was added. After confirming the completion of the reaction by thin layer chromatography, the sediment was filtered, washed with ethanol and dried to obtain chalcone

With the complex challenges of chemical substances, we look forward to future research findings about 2879-20-1,belong benzodioxans compound

Reference£º
Article; Yang, Yu-Shun; Yang, Bing; Zou, Yan; Li, Guigen; Zhu, Hai-Liang; Bioorganic and Medicinal Chemistry; vol. 24; 13; (2016); p. 3052 – 3061;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

Name is 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone, as a common heterocyclic compound, it belongs to benzodioxans compound, and cas is 2879-20-1, its synthesis route is as follows.,2879-20-1

A solution of 1-(2,3-dihydrobenzo[b][1,4]dioxin-6-yl)ethanone (XXXII) (4.68 g, 26.3 mmol), dimethylamine hydrochloride (2.78 g, 34.1 mmol), paraformaldehyde (1.18 g, 39.4 mmol) and 12 N HCl (50 muL) in ethanol (8.0 mL) was refluxed overnight. The solution was cooled to room temperature and the ethanol was evaporated under vacuum. The residue was treated with EtOAc, heated slightly and sonicated to disperse into fine particles. The solids were filtered and dried at room temperature to produce 1-(2,3-dihydrobenzo[b][1,4]dioxin-6-yl)-3-(dimethylamino) propan-1-one hydrochloride as a white solid, (7.73 g, quantitative yield). The solid was cooled in minimum about of water (12 mL) and cooled to 0 C. A 20% aqueous solution of NaOH was added until pH=10. The solution was extracted with DCM, dried and evaporated to produce 1-(2,3-dihydrobenzo[b][1,4]dioxin-6-yl)-3-(dimethylamino) propan-1-one (XXXIII) a colorless oil (2.485 g, 10.6 mmol, 40.2% yield) 1H NMR (CDCl3, 500 MHz): delta ppm 2.77 (s, 6H), 3.41 (m, 2H), 3.56 (m, 2H), 4.25 (m, 4H), 6.85 (m, 1H), 7.45 (m, 2H); ESIMS found C13H17NO3 m/z 236 (M+H).

With the complex challenges of chemical substances, we look forward to future research findings about 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone

Reference£º
Patent; Kumar KC, Sunil; Wallace, David Mark; Hood, John; Barroga, Charlene F.; US2014/243349; (2014); A1;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

2879-20-1, 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone is a benzodioxans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,2879-20-1

General procedure: A series of sixteen novel 1, 4-benzodioxane-based thiosemicarbazones(3a-p) was synthesized by reacting appropriatethiosemicarbazide (1a-p) (5 mmol) and 1, 4-benzodioxan-6-ylmethyl ketone (2) (5 mmol) in methanol (15 mL) using glacialacetic acid (1e2 drops) as catalyst. Reflux at 80 C for 6 h wascarried out and the product formation and the reaction completion were examined by thin layer chromatography. Upon completion,the reaction mixturewas allowed to cool at r.t and the solid productwas collected by suction filtration followed by washing with hotmethanol and then dried in vacuum. Finally, the target thiosemicarbazonesderivatives were recrystallized from chloroformmethanolmixture (1:1) in good to excellent yields. The X-raymeasurements were read by mounting a 3m single crystal on agreased MiTe Gen loop and was inspected through thediffractometer (Bruker D8 Venture APEX diffractometer) at 296 (2)K by means of graphite-monochromated MoeK a radiation(l 0.71073 A); diffractometer was complimented with an areadetector (Photon 100 CCD) along with a cooler (Oxford Cryostream).APEX-II software was used to collect Data [41] and SAINTwas operated for integration [42] The SADABS (multi-scanapproach) was used for correction in absorption [43]. and intrinsicphasing (SHELXT)was employed to the solve the structure [44]. Fullleast squares refinement of all detected reflections were used todetermine the final cell constants and assign positions of all atomsother than H to the consequential difference maps via refinementagainst F2. Whereas H atoms were assigned location and addedagainst F2 and were refined by riding model. SHELXL-97 wasimplemented to refine anisotropically [45]. The CCDC (CSD depositionnumbers 1874544) of the structure has been deposited. Thedetailed characterization of compounds 3a e 3p are given insupporting informations.

The synthetic route of 2879-20-1 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Shehzad, Muhammad Tariq; Khan, Ajmal; Islam, Muhammad; Hameed, Abdul; Khiat, Mohammed; Halim, Sobia Ahsan; Anwar, Muhammad U.; Shah, Syed Raza; Hussain, Javid; Csuk, Rene; Khan, Samra; Al-Harrasi, Ahmed; Shafiq, Zahid; Journal of Molecular Structure; vol. 1209; (2020);,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

As a common heterocyclic compound, it belongs to benzodioxans compound, name is 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone, and cas is 2879-20-1, its synthesis route is as follows.,2879-20-1

General procedure: To 1-(2,3-dihydrobenzo[b][1,4]dioxin-6-yl)ethan-1-one(A) (1 mmol) alcohol solution (5 mL) was added substituted benzaldehyde(1 mmol). After dissolution, 50% NaOH (0.5 mL) was added. After confirming the completion of the reaction by thin layer chromatography, the sediment was filtered, washed with ethanol and dried to obtain chalcone

With the complex challenges of chemical substances, we look forward to future research findings about 2879-20-1,belong benzodioxans compound

Reference£º
Article; Yang, Yu-Shun; Yang, Bing; Zou, Yan; Li, Guigen; Zhu, Hai-Liang; Bioorganic and Medicinal Chemistry; vol. 24; 13; (2016); p. 3052 – 3061;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

As a common heterocyclic compound, it belongs to benzodioxans compound, name is 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone, and cas is 2879-20-1, its synthesis route is as follows.,2879-20-1

General procedure: To 1-(2,3-dihydrobenzo[b][1,4]dioxin-6-yl)ethan-1-one(A) (1 mmol) alcohol solution (5 mL) was added substituted benzaldehyde(1 mmol). After dissolution, 50% NaOH (0.5 mL) was added. After confirming the completion of the reaction by thin layer chromatography, the sediment was filtered, washed with ethanol and dried to obtain chalcone

With the complex challenges of chemical substances, we look forward to future research findings about 2879-20-1,belong benzodioxans compound

Reference£º
Article; Yang, Yu-Shun; Yang, Bing; Zou, Yan; Li, Guigen; Zhu, Hai-Liang; Bioorganic and Medicinal Chemistry; vol. 24; 13; (2016); p. 3052 – 3061;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

As a common heterocyclic compound, it belong benzodioxans compound,1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone,2879-20-1,Molecular formula: C10H10O3,mainly used in chemical industry, its synthesis route is as follows.,2879-20-1

Sodium cyanoborohydride (18.7 mg, 0.3 mmol) was added to a mixture of intermediate 27 (50 mg, 0.2 mmol, hydrochloric acid salt), 6-acetyl-l,4-benzodioxane (CAS: 2879- 20-1; 70.7 mg, 3.97 mmol), triethylamine (0.069 mL, 0.5 mmol) and Ti(OiPr)4 (0.076 mL, 0.26 mmol) in anhydrous MeOH (0.48 mL). The resulting suspension was stirred at rt for 16 h and then the mixture was heated at 70 C and further stirred for 16 h. The mixture was cooled to rt and then filtered through a celite pad and the volatiles were evaporated in vacuo. Water and EtOAc were added. The organic phase was separated, dried over Na2S04, filtered and the filtrate was evaporated in vacuo. The resultant oil was purified by RP HPLC (Stationary phase: CI 8 XBridge 30 x 100 mm 5 muiotaeta), mobile phase: gradient from 47% 10 mM NH4CO3H pH 9 solution in water, 53% MeOH to 24% 10 mM NH4CO3H pH 9 solution in water, 76% MeOH) to yield product 40 as a white solid (20 mg, 27% yield).

With the synthetic route has been constantly updated, we look forward to future research findings about 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone,belong benzodioxans compound

Reference£º
Patent; JANSSEN PHARMACEUTICA NV; BARTOLOME-NEBREDA, Jose, Manuel; TRABANCO-SUAREZ, Andres, Avelino; MARTINEZ VITURRO, Carlos, Manuel; TRESADERN, Gary, John; ALCAZAR-VACA, Manuel, Jesus; (126 pag.)WO2018/109198; (2018); A1;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem