Category: 2879-20-1

1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone, cas is 2879-20-1, it is a common heterocyclic compound, the benzodioxans compound, its synthesis route is as follows.

General procedure: A series of sixteen novel 1, 4-benzodioxane-based thiosemicarbazones(3a-p) was synthesized by reacting appropriatethiosemicarbazide (1a-p) (5 mmol) and 1, 4-benzodioxan-6-ylmethyl ketone (2) (5 mmol) in methanol (15 mL) using glacialacetic acid (1e2 drops) as catalyst. Reflux at 80 C for 6 h wascarried out and the product formation and the reaction completion were examined by thin layer chromatography. Upon completion,the reaction mixturewas allowed to cool at r.t and the solid productwas collected by suction filtration followed by washing with hotmethanol and then dried in vacuum. Finally, the target thiosemicarbazonesderivatives were recrystallized from chloroformmethanolmixture (1:1) in good to excellent yields. The X-raymeasurements were read by mounting a 3m single crystal on agreased MiTe Gen loop and was inspected through thediffractometer (Bruker D8 Venture APEX diffractometer) at 296 (2)K by means of graphite-monochromated MoeK a radiation(l 0.71073 A); diffractometer was complimented with an areadetector (Photon 100 CCD) along with a cooler (Oxford Cryostream).APEX-II software was used to collect Data [41] and SAINTwas operated for integration [42] The SADABS (multi-scanapproach) was used for correction in absorption [43]. and intrinsicphasing (SHELXT)was employed to the solve the structure [44]. Fullleast squares refinement of all detected reflections were used todetermine the final cell constants and assign positions of all atomsother than H to the consequential difference maps via refinementagainst F2. Whereas H atoms were assigned location and addedagainst F2 and were refined by riding model. SHELXL-97 wasimplemented to refine anisotropically [45]. The CCDC (CSD depositionnumbers 1874544) of the structure has been deposited. Thedetailed characterization of compounds 3a e 3p are given insupporting informations., 2879-20-1

As the rapid development of chemical substances, we look forward to future research findings about 2879-20-1

Reference£º
Article; Shehzad, Muhammad Tariq; Khan, Ajmal; Islam, Muhammad; Hameed, Abdul; Khiat, Mohammed; Halim, Sobia Ahsan; Anwar, Muhammad U.; Shah, Syed Raza; Hussain, Javid; Csuk, Rene; Khan, Samra; Al-Harrasi, Ahmed; Shafiq, Zahid; Journal of Molecular Structure; vol. 1209; (2020);,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.2879-20-1,1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone,as a common compound, the synthetic route is as follows.,2879-20-1

General procedure: A series of sixteen novel 1, 4-benzodioxane-based thiosemicarbazones(3a-p) was synthesized by reacting appropriatethiosemicarbazide (1a-p) (5 mmol) and 1, 4-benzodioxan-6-ylmethyl ketone (2) (5 mmol) in methanol (15 mL) using glacialacetic acid (1e2 drops) as catalyst. Reflux at 80 C for 6 h wascarried out and the product formation and the reaction completion were examined by thin layer chromatography. Upon completion,the reaction mixturewas allowed to cool at r.t and the solid productwas collected by suction filtration followed by washing with hotmethanol and then dried in vacuum. Finally, the target thiosemicarbazonesderivatives were recrystallized from chloroformmethanolmixture (1:1) in good to excellent yields. The X-raymeasurements were read by mounting a 3m single crystal on agreased MiTe Gen loop and was inspected through thediffractometer (Bruker D8 Venture APEX diffractometer) at 296 (2)K by means of graphite-monochromated MoeK a radiation(l 0.71073 A); diffractometer was complimented with an areadetector (Photon 100 CCD) along with a cooler (Oxford Cryostream).APEX-II software was used to collect Data [41] and SAINTwas operated for integration [42] The SADABS (multi-scanapproach) was used for correction in absorption [43]. and intrinsicphasing (SHELXT)was employed to the solve the structure [44]. Fullleast squares refinement of all detected reflections were used todetermine the final cell constants and assign positions of all atomsother than H to the consequential difference maps via refinementagainst F2. Whereas H atoms were assigned location and addedagainst F2 and were refined by riding model. SHELXL-97 wasimplemented to refine anisotropically [45]. The CCDC (CSD depositionnumbers 1874544) of the structure has been deposited. Thedetailed characterization of compounds 3a e 3p are given insupporting informations.

2879-20-1 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone 76143, abenzodioxans compound, is more and more widely used in various fields.

Reference£º
Article; Shehzad, Muhammad Tariq; Khan, Ajmal; Islam, Muhammad; Hameed, Abdul; Khiat, Mohammed; Halim, Sobia Ahsan; Anwar, Muhammad U.; Shah, Syed Raza; Hussain, Javid; Csuk, Rene; Khan, Samra; Al-Harrasi, Ahmed; Shafiq, Zahid; Journal of Molecular Structure; vol. 1209; (2020);,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

2879-20-1, 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone is a benzodioxans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: To 1-(2,3-dihydrobenzo[b][1,4]dioxin-6-yl)ethan-1-one(A) (1 mmol) alcohol solution (5 mL) was added substituted benzaldehyde(1 mmol). After dissolution, 50% NaOH (0.5 mL) was added. After confirming the completion of the reaction by thin layer chromatography, the sediment was filtered, washed with ethanol and dried to obtain chalcone, 2879-20-1

As the paragraph descriping shows that 2879-20-1 is playing an increasingly important role.

Reference£º
Article; Yang, Yu-Shun; Yang, Bing; Zou, Yan; Li, Guigen; Zhu, Hai-Liang; Bioorganic and Medicinal Chemistry; vol. 24; 13; (2016); p. 3052 – 3061;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

2879-20-1, 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone is a benzodioxans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: 1a-j (0.0299 – 0.0532 g, 0.299 mmol, 1 eq.), 2a-d (0.0166 – 0.228 g, 0.224 mmol, 0.75 eq.), FeCl3 (0.0145 g, 0.0897 mmol, 0.3 eq.), (NH4)2S2O8 (0.1363 g, 0.598 mmol, 2 eq.), and DCE / CCl4 (0.75 mL, 1 / 1) were stirred in Schott culture tubes (H ¡Á diam. 160 mm ¡Á 16 mm) at 120 C for 3 h. Further, after adding a solution of 2a-d (0.055 – 0.0763, 0.0748 mmol, 0.25 eq.) and DCE / CCl4 (0.08 mL, 1 / 1), the reaction mixture was stirred at 120 C for 3 h (3 times at 3-hour intervals). Next it was stirred at 120 C for 12 h. The yields of 3a-f,a-d were determined by 1H NMR (CDCl3) after the filtration of the reaction mass through a thin pad (0.4 – 0.5 cm) of silica gel (0.015 – 0.040 mm) using 20 mL of DCM and evaporation of solvent in vacuum. Products 3c,b and 3d,a-d were isolated by gradient flash chromatography (eluent: petroleum ether / ethyl acetate).

2879-20-1, As the paragraph descriping shows that 2879-20-1 is playing an increasingly important role.

Reference£º
Article; Arzumanyan, Ashot V.; Tetrahedron Letters; vol. 58; 50; (2017); p. 4667 – 4671;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.2879-20-1,1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone,as a common compound, the synthetic route is as follows.,2879-20-1

General procedure: Equimolar quantities of substituted benzaldehyde and 1-(2H-1,3-benzodioxol-5-yl)ethan-1-one or 1-(2,3-dihydro-1,4-benzodioxin-6-yl)ethan-1-one were dissolved in 40% KOH and ethanol. The reactionmixture was then stirred for 10 h and poured into ice-cold water. Theprecipitated product was washed with water, dried, and recrystallizedfrom ethanol.

The synthetic route of 2879-20-1 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Parambi, Della Grace Thomas; Oh, Jong Min; Baek, Seung Cheol; Lee, Jae Pil; Tondo, Anna Rita; Nicolotti, Orazio; Kim, Hoon; Mathew, Bijo; Bioorganic Chemistry; vol. 93; (2019);,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

2879-20-1, 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone is a benzodioxans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: Method G: a solution of compound 5a (210 mg, 1.28 mmol) inanhydrous THF (5 mL) was stirred at 0 C under argon beforeaddition of phenyltrimethylammonium tribromide (481 mg,1.28 mmol). The mixture was then stirred for 15 min at 0 C andwarmed to room temperature. The reaction mixture was stirred for16 h and evaporated to dryness. The residue was suspended inwater and extracted with EtOAc. The combined organic layers werewashed with water and brine, dried over MgSO4, filtered, andevaporated under reduced pressure. A purification by silica columnchromatography using petroleum ether/CH2Cl2 (9:1 v/v) as eluentgave the desired bromoethanone 12a (239 mg, 77%) as a whitesolid., 2879-20-1

2879-20-1 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone 76143, abenzodioxans compound, is more and more widely used in various fields.

Reference£º
Article; Moine, Esperance; Dimier-Poisson, Isabelle; Enguehard-Gueiffier, Cecile; Loge, Cedric; Penichon, Melanie; Moire, Nathalie; Delehouze, Claire; Foll-Josselin, Beatrice; Ruchaud, Sandrine; Bach, Stephane; Gueiffier, Alain; Debierre-Grockiego, Francoise; Denevault-Sabourin, Caroline; European Journal of Medicinal Chemistry; vol. 105; (2015); p. 80 – 105;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

2879-20-1, 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone is a benzodioxans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

2879-20-1, Example 11 1-butyl-2,5-dioxo-3-(2-methylpropyl)-9-(1-(1,4-benzodioxan-6-yl)ethyl)-1,4,9-triazaspiro[5.5]undecane ¡¤ hydrochloride Under an atmosphere of argon, to a solution of the compound prepared in Example 9 (315 mg) in dichloromethane (5 ml) were added 1,4-benzodioxan-6-yl methyl ketone (285 mg), triethylamine (0.354 ml) and a solution of titanium tetrachloride in dichloromethane (1.0 M, 0.63 ml). The reaction mixture was stirred for 16 hours at room temperature. To the reaction mixture was added a solution of sodium cyanoborohydride (133 mg) in methanol (2 ml). The reaction mixture was stirred for 1 hour at room temperature. To the reaction mixture was added 2N aqueous solution of sodium hydroxide, and was extracted with ethyl acetate. The extract was dried over anhydrous magnesium sulfate and concentrated. The obtained residue was purified by column chromatography on silica gel (Fuji Silysia Chemical Ltd., BW235; chloroform: methanol = 50: 1). The obtained residue was dissolved in methanol. The solution was acidified by adding 1 N hydrochloric acid, and was concentrated to give the compound of the present invention (176 mg) having the following physical data. TLC: Rf 0.46 (chloroform: methanol = 10:1); NMR (CD3OD): delta 7.04 (d, J = 2.1 Hz, 1H), 6.98 (dd, J = 8.4, 2.1 Hz, 1H), 6.92 (d, J = 8.4 Hz, 1H), 4.40 (q, J = 6.9 Hz, 1H), 4.26 (s, 4H), 3.98 (dd, J = 8.1, 4.5 Hz, 1H), 3.82-3.17 (m, 6H), 2.55-2.04 (m, 4H), 1. 87-1.28 (m, 10H), 1.04-0.85 (m, 9H).

As the paragraph descriping shows that 2879-20-1 is playing an increasingly important role.

Reference£º
Patent; ONO PHARMACEUTICAL CO., LTD.; EP1236726; (2002); A1;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone, cas is 2879-20-1, it is a common heterocyclic compound, the benzodioxans compound, its synthesis route is as follows.

2879-20-1, General procedure: A mixture of acetophenone 4a (120 mg, 1.0 mmol), iodine (254 mg, 1.0 mmol), and CuO (88 mg, 1.1 mmol) in anhydrous methanol (10 mL) was heated at reflux, after disappearance of the reactant (1-12 h, monitored by TLC), 1,2-diamines 2a (108 mg, 1.0 mmol) and K3PO4*3H2O (266 mg, 1.0 mmol) was added and the mixture was stirred for 12 h at 40 C. The solvent was removed under reduced pressure, and 50 mL water was added to mixture, extracted with EtOAc three times (3¡Á50 mL). The extract was washed with Na2S2O3, dried over anhydrous Na2SO4, and concentrated in vacuo. The residue was purified by column chromatography on silica gel using petroleum ether/EtOAc as the eluent to give the expected products 6aa as pale yellow solid, (80% yield).

With the rapid development of chemical substances, we look forward to future research findings about 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone

Reference£º
Article; Lian, Mi; Li, Qi; Zhu, Yanping; Yin, Guodong; Wu, Anxin; Tetrahedron; vol. 68; 47; (2012); p. 9598 – 9605;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.2879-20-1,1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone,as a common compound, the synthetic route is as follows.

2-(2,3-dihydrobenzo[b] [l,4]dioxin-6-yl)acetic acid (S10-2).; A mixture of 1 ,4- benzodioxan-6-yl methyl ketone (SI 0-1; 5.5 g, 30.9 mmol), sulfur (1.98 g, 61.8 mmol) and morpholine (6.73 g, 6.76 mL, 77.3 mmol) was refluxed at 140C for 14 h. After cooling to rt, the reaction mixture was diluted with 150 mL of CH2C12, transferred to a seperatory funnel and washed with 25 mL of ice-cold brine. The aqueous layer was further extracted with CH2C12 (2 x 75 mL). The organic layers were combined, dried with Na2S04, and filtered. Activated charcoal was added to the filtrate and after several minutes was filtered and concentrated to give 12.7 g of a brown oil. A mixture of this in 75 mL of 10% KOH (ag.) was refluxed for 12h. After cooling the reaction mixture was transferred to a seperatory funnel and washed with ether (30 mL), The aqueous layer was acidified with 6N HC1 (~25 mL) to pH 2 and extracted with CH2C12 (4 x 100 mL). The organic layers were combined, washed with distilled water (100 ml), dried with Na2S04 and filtered. This was treated with charcoal, filtered, and solvent removed under reduced pressure and the resulting residue was purified by chromatography (hexane:EtOAc, 90:10 to 70:30) to give 3.90 g (65%) of S10-2. 1H NMR (500 MHz, CDC13) delta 6.80-6.82 (m, 2H), 6.74 (dd, J= 2.0, 8.2 Hz, 1H), 4.24 (s, 4H), 3.53 (s, 2H); MS (ESI) m/z 195.1 [M+H]+., 2879-20-1

As the paragraph descriping shows that 2879-20-1 is playing an increasingly important role.

Reference£º
Patent; SLOAN-KETTERING INSTITUTE FOR CANCER RESEARCH; CHIOSIS, Gabriela; TALDONE, Tony; SUN, Weilin; WO2011/44394; (2011); A1;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.2879-20-1,1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone,as a common compound, the synthetic route is as follows.

General procedure: Finely powdered CuO (0.8 g, 10.0 mmol) and I2 (2.53 g, 10.0 mmol) were added to a solution of aryl methyl ketone 9a (1.2 g, 10.0 mmol) in anhydrous MeOH (20 mL). The mixture was refluxed for 1-2.5 h. After disappearance of aryl methyl ketone 9a (monitored by TLC), the mixture was filtered and the solvent was removed under reduced pressure. The residue was poured into 10% Na2S2O3 solution (50 mL), the mixture was extracted with EtOAc (3 ¡Á 50 mL), and the organic layer was dried (Na2SO4). Removal of the solvent and purification of the residue by column chromatography gave the desired product 1a in 96% yield.

2879-20-1, The synthetic route of 2879-20-1 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Zhu, Yan-Ping; Cai, Qun; Gao, Qing-He; Jia, Feng-Cheng; Liu, Mei-Cai; Gao, Meng; Wu, An-Xin; Tetrahedron; vol. 69; 31; (2013); p. 6392 – 6398;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem