Some tips on 2879-20-1

2879-20-1 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone 76143, abenzodioxans compound, is more and more widely used in various fields.

2879-20-1, 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone is a benzodioxans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,2879-20-1

General procedure: To 1-(2,3-dihydrobenzo[b][1,4]dioxin-6-yl)ethan-1-one(A) (1 mmol) alcohol solution (5 mL) was added substituted benzaldehyde(1 mmol). After dissolution, 50% NaOH (0.5 mL) was added. After confirming the completion of the reaction by thin layer chromatography, the sediment was filtered, washed with ethanol and dried to obtain chalcone

2879-20-1 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone 76143, abenzodioxans compound, is more and more widely used in various fields.

Reference£º
Article; Yang, Yu-Shun; Yang, Bing; Zou, Yan; Li, Guigen; Zhu, Hai-Liang; Bioorganic and Medicinal Chemistry; vol. 24; 13; (2016); p. 3052 – 3061;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

Some tips on 2879-20-1

2879-20-1 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone 76143, abenzodioxans compound, is more and more widely used in various fields.

2879-20-1, 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone is a benzodioxans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,2879-20-1

General procedure: A sealed tube was charged with acetophenone 5a (600 mg, 5 mmol), ethyl 3-oxo-3-(3,4,5-trimethoxyphenyl)propanoate 6a (1410 mg, 5.0 mmol), iodine (1396 mg, 5.5 mmol) and CuO (440 mg, 5.5 mmol) at room temperature, and then solvent DMSO (10 mL) was added. The resulting mixture was stirred at 70 C for 12 h, after disappearance of the reactant (monitored by TLC), and added 50 mL water to the mixture, then extracted with EtOAc 3 times (3 ¡Á 50 mL). The extract was washed with 10% Na2S2O3 solution, dried over anhydrous Na2SO4 and concentrated under reduced pressure. The residue was purified by column chromatography on silica gel (petroleum ether/EtOAc) to yield the desired product 1a as a yellow solid (yield: 84%).

2879-20-1 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone 76143, abenzodioxans compound, is more and more widely used in various fields.

Reference£º
Article; Zhu, Yan-Ping; Cai, Qun; Jia, Feng-Cheng; Liu, Mei-Cai; Gao, Qing-He; Meng, Xiang-Gao; Wu, An-Xin; Tetrahedron; vol. 70; 50; (2014); p. 9536 – 9544;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

Some tips on 2879-20-1

2879-20-1 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone 76143, abenzodioxans compound, is more and more widely used in various fields.

2879-20-1, 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone is a benzodioxans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a solution of dithiocarbonic acid O-benzyl ester S-methyl ester (0.99 g) and 1-(2,3-dihydrobenzo[1,4]dioxin-6-yl)ethanone (0.89 g) in toluene (20 mL) was added sodium amide (0.39 g) at room temperature, and the mixture was stirred at room temperature for 3 days. A hydrochloric acid aqueous solution (2 mol/L) was added to the reaction mixture, and the mixture was extracted with diethyl ether. The organic layer was washed with brine and dried over anhydrous magnesium sulfate, and the solvent was removed under reduced pressure. Acetonitrile (5 mL), triethylamine (2.5 g) and isopropylhydrazine hydrochloride (0.55 g) were added to the residue, and the mixture was stirred at room temperature overnight. Water and diethyl ether was added to the reaction mixture, and the organic layer was separated. The organic layer was washed with brine and dried over anhydrous magnesium sulfate, and the solvent was removed under reduced pressure. The residue was purified by column chromatography on aminopropylated silica gel (eluent: dichloromethane) to give the title compound (1.8 g)., 2879-20-1

2879-20-1 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone 76143, abenzodioxans compound, is more and more widely used in various fields.

Reference£º
Patent; Kissei Pharmaceutical Co., Ltd.; EP1550668; (2005); A1;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

Some tips on 2879-20-1

2879-20-1 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone 76143, abenzodioxans compound, is more and more widely used in various fields.

2879-20-1, 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone is a benzodioxans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,2879-20-1

General procedure: Equimolar quantities of substituted benzaldehyde and 1-(2H-1,3-benzodioxol-5-yl)ethan-1-one or 1-(2,3-dihydro-1,4-benzodioxin-6-yl)ethan-1-one were dissolved in 40% KOH and ethanol. The reactionmixture was then stirred for 10 h and poured into ice-cold water. Theprecipitated product was washed with water, dried, and recrystallizedfrom ethanol.

2879-20-1 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone 76143, abenzodioxans compound, is more and more widely used in various fields.

Reference£º
Article; Parambi, Della Grace Thomas; Oh, Jong Min; Baek, Seung Cheol; Lee, Jae Pil; Tondo, Anna Rita; Nicolotti, Orazio; Kim, Hoon; Mathew, Bijo; Bioorganic Chemistry; vol. 93; (2019);,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

New learning discoveries about 2879-20-1

As the paragraph descriping shows that 2879-20-1 is playing an increasingly important role.

2879-20-1, 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone is a benzodioxans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,2879-20-1

General procedure: To a stirred solution of 1 (0.84 mmol) in 5 N NaOH (3 mL) was added 2-heptanone (7.18 mmol) dropwise. The reaction mixture was heated to 60 C and kept for 3 h under stirring conditions. After cooling, the mixture was then extracted with CHCl3/MeOH (10:1, v/v) in a separatory funnel. The organic layer was washed to neutral status using water, dried using anhydrous MgSO4, and filtered. The filtrate was concentrated under reduced pressure to yield a crude intermediate. The crude intermediate was dissolved in anhydrous tetrahydrofuran (8 mL), followed by adding HOAc (1.0 mL) and formaldehyde (15.06 mmol) to the solution. The reaction mixture was kept refluxing for 3 h. After the reaction was halted and the reaction mixture cooled, evaporation under reduced pressure was done to remove the solvent from the reaction mixture. The residue was acidified using aqueous 2 N HCl (2 mL), and the solution was stirred at room temperature for 1 h, and extracted with CHCl3/MeOH (10:1, v/v) in a separatory funnel. The organic layer was dried using anhydrous MgSO4, filtered, and concentrated under reduced pressure to yield the crude product. The crude product was purified using silica gel CC (elutated with CHCl3:MeOH, 20:1, v/v) to yield 3e (97 mg, 23.3% yield) as a yellow solid.

As the paragraph descriping shows that 2879-20-1 is playing an increasingly important role.

Reference£º
Article; Zhang, Zhi-Hui; Yan, Yu; Deng, An-Jun; Zhang, Hai-Jing; Li, Zhi-Hong; Yuan, Tian-Yi; Fang, Lian-Hua; Wu, Lian-Qiu; Du, Guan-Hua; Qin, Hai-Lin; Chinese Chemical Letters; vol. 29; 1; (2018); p. 131 – 135;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

Brief introduction of 2879-20-1

The synthetic route of 2879-20-1 has been constantly updated, and we look forward to future research findings.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.2879-20-1,1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone,as a common compound, the synthetic route is as follows.,2879-20-1

General procedure: Equimolar quantities of substituted benzaldehyde and 1-(2H-1,3-benzodioxol-5-yl)ethan-1-one or 1-(2,3-dihydro-1,4-benzodioxin-6-yl)ethan-1-one were dissolved in 40% KOH and ethanol. The reactionmixture was then stirred for 10 h and poured into ice-cold water. Theprecipitated product was washed with water, dried, and recrystallizedfrom ethanol.

The synthetic route of 2879-20-1 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Parambi, Della Grace Thomas; Oh, Jong Min; Baek, Seung Cheol; Lee, Jae Pil; Tondo, Anna Rita; Nicolotti, Orazio; Kim, Hoon; Mathew, Bijo; Bioorganic Chemistry; vol. 93; (2019);,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

Downstream synthetic route of 2879-20-1

2879-20-1, As the paragraph descriping shows that 2879-20-1 is playing an increasingly important role.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.2879-20-1,1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone,as a common compound, the synthetic route is as follows.

General procedure: To 1-(2,3-dihydrobenzo[b][1,4]dioxin-6-yl)ethan-1-one(A) (1 mmol) alcohol solution (5 mL) was added substituted benzaldehyde(1 mmol). After dissolution, 50% NaOH (0.5 mL) was added. After confirming the completion of the reaction by thin layer chromatography, the sediment was filtered, washed with ethanol and dried to obtain chalcone

2879-20-1, As the paragraph descriping shows that 2879-20-1 is playing an increasingly important role.

Reference£º
Article; Yang, Yu-Shun; Yang, Bing; Zou, Yan; Li, Guigen; Zhu, Hai-Liang; Bioorganic and Medicinal Chemistry; vol. 24; 13; (2016); p. 3052 – 3061;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

Brief introduction of 2879-20-1

The synthetic route of 2879-20-1 has been constantly updated, and we look forward to future research findings.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.2879-20-1,1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone,as a common compound, the synthetic route is as follows.,2879-20-1

General procedure: 3.3. Reaction procedure for the synthesis of 5a The reaction was conducted in a 10 mL of V-type ask equippedwith triangle magnetic stirring. In a typical reaction, 1a(0.20 mmol) was mixed with 2a (0.20 mmol) and 4a (0.20 mmol)and BF3Et2O (50 mol %) in nitromethane (1.0 mL). The mixturewas then stirred at 80 Cforve hours. After reaction, 5a wasobtained by isolation with preparative TLC (eluting solution: pe-troleum ether/ethyl acetate5/1 (v/v)) in 77% (0.15 mmol, 51.1 mg)yield.

The synthetic route of 2879-20-1 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Wang, Man; Liu, Changhui; Gu, Yanlong; Tetrahedron; vol. 72; 43; (2016); p. 6854 – 6865;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

Simple exploration of 2879-20-1

2879-20-1 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone 76143, abenzodioxans compound, is more and more widely used in various fields.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.2879-20-1,1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone,as a common compound, the synthetic route is as follows.

General procedure: To 1-(2,3-dihydrobenzo[b][1,4]dioxin-6-yl)ethan-1-one(A) (1 mmol) alcohol solution (5 mL) was added substituted benzaldehyde(1 mmol). After dissolution, 50% NaOH (0.5 mL) was added. After confirming the completion of the reaction by thin layer chromatography, the sediment was filtered, washed with ethanol and dried to obtain chalcone, 2879-20-1

2879-20-1 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone 76143, abenzodioxans compound, is more and more widely used in various fields.

Reference£º
Article; Yang, Yu-Shun; Yang, Bing; Zou, Yan; Li, Guigen; Zhu, Hai-Liang; Bioorganic and Medicinal Chemistry; vol. 24; 13; (2016); p. 3052 – 3061;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

Analyzing the synthesis route of 2879-20-1

The synthetic route of 2879-20-1 has been constantly updated, and we look forward to future research findings.

2879-20-1, 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone is a benzodioxans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,2879-20-1

General procedure: N-Bromobutanimide (NBS, 356 mg, 2.0 mmol) and 4-Methylbenzenesulfonic acid (PTSA, 344 mg, 2.0 mmol) were added to a well-stirred solution of aryl methyl ketone 8a (240 mg, 2.0 mmol) in anhydrous MeCN (15 mL). The mixture was stirred at room temperature for 1 h, and then refluxed for another 1-2.5 h. After disappearance of aryl methyl ketone 8a (monitored by TLC), the solvent was removed under reduced pressure, then added 50mL water to the mixture, extracted with EtOAc 3 times (3 ¡Á 50 mL). The extract was washed with 10% NaCl solution, dried over anhydrous Na2SO4 and concentrated under reduced pressure. The residue was puried by column chromatography on silica gel to yield the desired product 4a as a white solid in 90% yield.

The synthetic route of 2879-20-1 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Zhu, Yan-Ping; Cai, Qun; Gao, Qing-He; Jia, Feng-Cheng; Liu, Mei-Cai; Gao, Meng; Wu, An-Xin; Tetrahedron; vol. 69; 31; (2013); p. 6392 – 6398;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem