Heterocyclic Building Blocks-benzodioxan

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.2879-20-1,1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone,as a common compound, the synthetic route is as follows.

General procedure: Carbonyl substrate, 0.02 mol, was added in portions to a suspension of 0.01 mol NaBH4 in 0.3 mol of the corresponding alcohol solvent, and the mixture was stirred for 2-2.5 h at 20C. The resulting boron derivatives of benzyl alcohols were decomposed with 10% aqueous HCl (3.7 mL), and the mixture was stirred for a required time at a required temperature(see Tables 1-5), cooled, and poured into 200 mL of cold water. The products were extracted with diethylether (2 ¡Á 40 mL), the combined extracts were washed with water and dried over anhydrous sodium sulfate, the solvent was distilled off on a rotary evaporator, and the residue was analyzed by 1H NMR. If necessary,benzyl ethers were isolated by chromatography. Alcohol coreactants poorly soluble in water were removed from the diethyl ether extracts by vacuum distillation, and the target ethers ware isolated from the still residue. Ethers 2a [9], 2c [3], 2h, 4a [10], 4b [11], 4i,4l, 7e, 10c, 10d, 10e [4], and 13a [12] were described previously. Ethers 2b, 2d-2g, 2i, 4c-4h, 4j, 4k, 4m-4w, 7a-7d, 7f, 7g, and 13b-13f are mobile liquids, and 7h-7j, 10a, 10b, and 10f-10i are viscous liquids.

2879-20-1, As the paragraph descriping shows that 2879-20-1 is playing an increasingly important role.

Reference£º
Review; Mochalov; Fedotov; Trofimova; Zefirov; Russian Journal of Organic Chemistry; vol. 52; 4; (2016); p. 503 – 512; Zh. Org. Khim.; vol. 52; 4; (2016); p. 503 – 512,10;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

2879-20-1, 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone is a benzodioxans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,2879-20-1

General procedure: A series of sixteen novel 1, 4-benzodioxane-based thiosemicarbazones(3a-p) was synthesized by reacting appropriatethiosemicarbazide (1a-p) (5 mmol) and 1, 4-benzodioxan-6-ylmethyl ketone (2) (5 mmol) in methanol (15 mL) using glacialacetic acid (1e2 drops) as catalyst. Reflux at 80 C for 6 h wascarried out and the product formation and the reaction completion were examined by thin layer chromatography. Upon completion,the reaction mixturewas allowed to cool at r.t and the solid productwas collected by suction filtration followed by washing with hotmethanol and then dried in vacuum. Finally, the target thiosemicarbazonesderivatives were recrystallized from chloroformmethanolmixture (1:1) in good to excellent yields. The X-raymeasurements were read by mounting a 3m single crystal on agreased MiTe Gen loop and was inspected through thediffractometer (Bruker D8 Venture APEX diffractometer) at 296 (2)K by means of graphite-monochromated MoeK a radiation(l 0.71073 A); diffractometer was complimented with an areadetector (Photon 100 CCD) along with a cooler (Oxford Cryostream).APEX-II software was used to collect Data [41] and SAINTwas operated for integration [42] The SADABS (multi-scanapproach) was used for correction in absorption [43]. and intrinsicphasing (SHELXT)was employed to the solve the structure [44]. Fullleast squares refinement of all detected reflections were used todetermine the final cell constants and assign positions of all atomsother than H to the consequential difference maps via refinementagainst F2. Whereas H atoms were assigned location and addedagainst F2 and were refined by riding model. SHELXL-97 wasimplemented to refine anisotropically [45]. The CCDC (CSD depositionnumbers 1874544) of the structure has been deposited. Thedetailed characterization of compounds 3a e 3p are given insupporting informations.

2879-20-1 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone 76143, abenzodioxans compound, is more and more widely used in various fields.

Reference£º
Article; Shehzad, Muhammad Tariq; Khan, Ajmal; Islam, Muhammad; Hameed, Abdul; Khiat, Mohammed; Halim, Sobia Ahsan; Anwar, Muhammad U.; Shah, Syed Raza; Hussain, Javid; Csuk, Rene; Khan, Samra; Al-Harrasi, Ahmed; Shafiq, Zahid; Journal of Molecular Structure; vol. 1209; (2020);,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.3663-80-7,2,3-Dihydrobenzo[b][1,4]dioxine-2-carboxylic acid,as a common compound, the synthetic route is as follows.,3663-80-7

General procedure: To a mixture of 2-amino-5-(4-methylphenyl) thiophene-3-carboxamide 1a (0.25 g, 0.107 mol) and 4-benzyloxy benzoic acid 4a (0.319 g, 0.140 mol) in anhydrous chloroform (4 ml) was added triethylamine (0.32 g, 0.323 mol) and phosphonic acid cyclic anhydride (1.02 g, 0.323 mol). The reaction mixture was irradiated at 120 ¡ãC in a microwave initiator for a given period of time (Table 1, entry 1). Once the substrate was completely consumed as monitored by TLC, the brown reaction mixture was cooled and poured into ice-cold water (10 ml). The product was extracted with ethyl acetate (2 .x. 25 ml) and the combined organic phase was washed with water, brine solution and dried over anhydrous sodium sulfite. The solvent was removed under vacuum and the brown residue was passed through a small plug of silica gel using petroleum ether/ethyl acetate (9/1) to afford 429 mg (94percent) of 2a as a yellow solid.

As the paragraph descriping shows that 3663-80-7 is playing an increasingly important role.

Reference£º
Article; Poojari, Subba; Parameswar Naik; Krishnamurthy; Tetrahedron Letters; vol. 53; 35; (2012); p. 4639 – 4643;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.17413-10-4,(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)methanamine,as a common compound, the synthetic route is as follows.

A mixture of compound 5 (50 mg, 0.127 mmol), (2,3-dihydrobenzo[b]-[1,4] dioxin-6-yl) methanamine (40 mg, 0.242 mmol), and DIPEA (0.1 mL, 0.127 mmol) in EtOH (0.6 mL) was placedinto sealed tube and stirred at 160C under microwave irradiation for 1 h. The mixture was cooled and purified by silica gel column chromatography (EtOAc-n-hexane; 22 : 67) to yield 6a(20 mg, 30%) as a colorless solid. 1H-NMR (400 MHz, CDCl3) delta: 8.60 (1H, br s), 8.28 (1H, d,J=2.0 Hz), 7.58 (1H, d, J=2.4 Hz), 7.45 (1H, br s), 7.34 (1H,d, J=8.8 Hz), 7.31 (1H, s), 7.23 (1H, d, J=8.8 Hz), 6.87 (1H,d, J=1.2 Hz), 6.82 (1H, d, J=1.2 Hz), 6.81 (1H, s), 6.61 (1H, t,J=55.2 Hz), 6.27 (1H, br s), 4.60 (2H, d, J=5.2 Hz), 4.56 (2H,d, J=5.6 Hz), 4.24 (4H, s), 2.43 (3H, s), 1.94 (1H, s), 1.59 (6H,s). 13C-NMR (100 MHz, CDCl3) delta: 167.3, 156.7, 154.9, 143.5,142.7, 137.6, 135.9 (t, J=4.3 Hz), 135.7, 132.8 (t, J=20.9 Hz),132.5, 131.7, 130.1 (t, J=2.1 Hz), 125.4 (t, J=7.4 Hz), 120.7,117.3, 116.6, 114.1 (t, J=238 Hz), 108.9, 106.0, 94.3, 79.2,65.7, 64.4, 64.3, 44.4, 43.5, 31.6, 18.2. MS (ESI) m/z: 522.1(M+H)+. FAB-MS m/z: 522.2230 (Calcd for C29H30F2N3O4+:522.2204). HPLC purity 95.1% (6.14 min, method A)., 17413-10-4

The synthetic route of 17413-10-4 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Takahashi, Bitoku; Funami, Hideaki; Shibata, Makoto; Maruoka, Hiroshi; Koyama, Makoto; Kanki, Satomi; Muto, Tsuyoshi; Chemical and Pharmaceutical Bulletin; vol. 63; 10; (2015); p. 825 – 832;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

4442-53-9, 2,3-Dihydrobenzo[b][1,4]dioxine-5-carboxylic acid is a benzodioxans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,4442-53-9

A. N,N’-Carbonyidiimidazole (1.62 g, 10 mmol) was added to a stirred solution of 2,3-dihydrobenzo[1,4]dioxine-5-carboxylic acid(1.64 g, 10 mmol) in tetrahydrofuran (25 mL) and the resulting solution was heated at 60¡ã C. for 15 minutes. The solution was cooled to room temperature and -4-(aminomethyl)pyridine (1.08 g, 10 mmol) was added. The reaction mixture was heated at 60¡ã C. for 2 hours, cooled, poured into water, and extracted 3 times with ethyl acetate. The combined ethyl acetate extract was dried (Na2SO4) and evaporated in vacuo to a crystalline residue which was triturated with water, filtered, and dried in vacuo to give 2,3-dihydrobenzo[1,4]dioxine-5-carboxylic acid (pyridin-4-ylmethyl)amide as a white solid (1.95 g, 72percent); m.p. 120-121¡ã C.

The synthetic route of 4442-53-9 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Syntex (USA) LLC; US6172062; (2001); B2;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

2879-20-1, 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone is a benzodioxans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,2879-20-1

General procedure: Equimolar quantities of substituted benzaldehyde and 1-(2H-1,3-benzodioxol-5-yl)ethan-1-one or 1-(2,3-dihydro-1,4-benzodioxin-6-yl)ethan-1-one were dissolved in 40% KOH and ethanol. The reactionmixture was then stirred for 10 h and poured into ice-cold water. Theprecipitated product was washed with water, dried, and recrystallizedfrom ethanol.

2879-20-1 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone 76143, abenzodioxans compound, is more and more widely used in various fields.

Reference£º
Article; Parambi, Della Grace Thomas; Oh, Jong Min; Baek, Seung Cheol; Lee, Jae Pil; Tondo, Anna Rita; Nicolotti, Orazio; Kim, Hoon; Mathew, Bijo; Bioorganic Chemistry; vol. 93; (2019);,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

2879-20-1, 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone is a benzodioxans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a solution of dithiocarbonic acid O-benzyl ester S-methyl ester (0.99 g) and 1-(2,3-dihydrobenzo[1,4]dioxin-6-yl)ethanone (0.89 g) in toluene (20 mL) was added sodium amide (0.39 g) at room temperature, and the mixture was stirred at room temperature for 3 days. A hydrochloric acid aqueous solution (2 mol/L) was added to the reaction mixture, and the mixture was extracted with diethyl ether. The organic layer was washed with brine and dried over anhydrous magnesium sulfate, and the solvent was removed under reduced pressure. Acetonitrile (5 mL), triethylamine (2.5 g) and isopropylhydrazine hydrochloride (0.55 g) were added to the residue, and the mixture was stirred at room temperature overnight. Water and diethyl ether was added to the reaction mixture, and the organic layer was separated. The organic layer was washed with brine and dried over anhydrous magnesium sulfate, and the solvent was removed under reduced pressure. The residue was purified by column chromatography on aminopropylated silica gel (eluent: dichloromethane) to give the title compound (1.8 g)., 2879-20-1

2879-20-1 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone 76143, abenzodioxans compound, is more and more widely used in various fields.

Reference£º
Patent; Kissei Pharmaceutical Co., Ltd.; EP1550668; (2005); A1;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

2879-20-1, 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone is a benzodioxans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,2879-20-1

General procedure: A sealed tube was charged with acetophenone 5a (600 mg, 5 mmol), ethyl 3-oxo-3-(3,4,5-trimethoxyphenyl)propanoate 6a (1410 mg, 5.0 mmol), iodine (1396 mg, 5.5 mmol) and CuO (440 mg, 5.5 mmol) at room temperature, and then solvent DMSO (10 mL) was added. The resulting mixture was stirred at 70 C for 12 h, after disappearance of the reactant (monitored by TLC), and added 50 mL water to the mixture, then extracted with EtOAc 3 times (3 ¡Á 50 mL). The extract was washed with 10% Na2S2O3 solution, dried over anhydrous Na2SO4 and concentrated under reduced pressure. The residue was purified by column chromatography on silica gel (petroleum ether/EtOAc) to yield the desired product 1a as a yellow solid (yield: 84%).

2879-20-1 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone 76143, abenzodioxans compound, is more and more widely used in various fields.

Reference£º
Article; Zhu, Yan-Ping; Cai, Qun; Jia, Feng-Cheng; Liu, Mei-Cai; Gao, Qing-He; Meng, Xiang-Gao; Wu, An-Xin; Tetrahedron; vol. 70; 50; (2014); p. 9536 – 9544;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

2879-20-1, 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone is a benzodioxans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,2879-20-1

General procedure: To 1-(2,3-dihydrobenzo[b][1,4]dioxin-6-yl)ethan-1-one(A) (1 mmol) alcohol solution (5 mL) was added substituted benzaldehyde(1 mmol). After dissolution, 50% NaOH (0.5 mL) was added. After confirming the completion of the reaction by thin layer chromatography, the sediment was filtered, washed with ethanol and dried to obtain chalcone

2879-20-1 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone 76143, abenzodioxans compound, is more and more widely used in various fields.

Reference£º
Article; Yang, Yu-Shun; Yang, Bing; Zou, Yan; Li, Guigen; Zhu, Hai-Liang; Bioorganic and Medicinal Chemistry; vol. 24; 13; (2016); p. 3052 – 3061;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.274910-19-9,(2,3-Dihydrobenzo[b][1,4]dioxin-5-yl)methanol,as a common compound, the synthetic route is as follows.,274910-19-9

Example 6 2-(1,4-benzodioxan-5-yl)acetic acid (6). To a solution of 5-hydroxymethyl-1,4-benzodioxan (8.0 g, 48 mmol) in dichloromethane (200 mL) was added two droplets of N,N-dimethylformamide and thionyl chloride (5.0 mL, 68 mmol) at room temperature. After the resulting solution was boiled under reflux for 1 h and subsequently cooled to room temperature water (100 mL) was added. The phases were separated and the organic phase was dried (MgSO4) and the solvents evaporated in vacuo. A solution of the remaining oil (8.5 g, 46 mmol) was added to a mixture of sodium cyanide (5.0 g, 102 mmol) and N,N-dimethylformamide (100 mL) at room temperature. After stirring for 16 h at room temperature ice was added and the resulting slurry was extracted with diethyl ether (2*250 mL). The collected organic phases were washed with saturated calcium chloride, dried (Na2SO4) and the solvents were evaporated in vacuo. A mixture of the remaining oil (6.0 g, 34 mmol), ethanol (200 mL), sodium hydroxide (6.0 g) and water (6 mL) was boiled under reflux for 16 h. After evaporation of the solvents in vacuo, water (200 mL) was added and the resulting slurry was extracted with diethyl ether (2*200 mL). The collected organic phases were washed with brine, dried (Na2SO4) and the solvents were evaporated in vacuo affording 4.0 g (43%) of the title compound as an oil: 1H NMR (CDCl3) delta 3.65 (s, 2H), 4.15-4.30 (m, 4H), 6.70-6.85 (m, 3H).

274910-19-9 (2,3-Dihydrobenzo[b][1,4]dioxin-5-yl)methanol 2776182, abenzodioxans compound, is more and more widely used in various fields.

Reference£º
Patent; H. Lundbeck A/S; US2002/32205; (2002); A1;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem