Some tips on 4442-53-9

4442-53-9 2,3-Dihydrobenzo[b][1,4]dioxine-5-carboxylic acid 78184, abenzodioxans compound, is more and more widely used in various.

4442-53-9, 2,3-Dihydrobenzo[b][1,4]dioxine-5-carboxylic acid is a benzodioxans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Intermediate 60:[0212] Triethylamine in acetone was added dropwise to the solution of 2,3- dihydrobenzo[b][l,4]dioxine-5-carboxylic acid (360 mg, 2 mmol) in water and acetone at 0¡ãC. To the mixture was added ethyl carbonochloridate in acetone slowly. The mixture was stirred for 4 h then a solution of NaN3 (196 mg, 3.02 mmol) in water was added dropwise. The reaction mixture was stirred for 1 h then it was poured into ice water and extracted with Et20. The combined organic extracts were washed with brine, dried with MgS04, and concentrated in vacuo. The residue was dissolved in anhydrous toluene and the mixture was heated on a steam bath until nitrogen evolution had ceased. The toluene was then removed in vacuo and 20percent aq HCI (4 mL) was added and the solution was heated to reflux and stirred overnight. The reaction was concentrated under reduced pressure. The residue was dissolved in water, made strongly alkaline by the addition of 40percent aq NaOH, then extracted with Et20. The combined organic extracts were washed with brine, dried by MgS04, and purified by flash chromatography on silica gel column (PE:EtOAc=5:l) to give 2,3-dihydrobenzo[b][l,4]dioxin-5-amine (intermediate 60) (270 mg, 70percent). HPLC: 99percent, RT 1.214 min. MS (ESI) m/z 152.1 [M + H]+.

4442-53-9 2,3-Dihydrobenzo[b][1,4]dioxine-5-carboxylic acid 78184, abenzodioxans compound, is more and more widely used in various.

Reference£º
Patent; THE UNIVERSITY OF NORTH CAROLINA AT CHAPEL HILL; JIN, Jian; ROTH, Bryan; FRYE, Stephen; WO2012/3418; (2012); A2;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

Downstream synthetic route of 20197-75-5

As the paragraph descriping shows that 20197-75-5 is playing an increasingly important role.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.20197-75-5,Methyl 1,4-Benzodioxan-6-carboxylate,as a common compound, the synthetic route is as follows.

To a solution of methyl 2,3-dihydrobenzo[6][l,4]dioxine-6-carboxylate (780 mg, 4.0 mmol) in acetic acid (3 mL) was added dropwise cone. HNO3 (4 mL) while keeping the temperature below 20 0 C and the resulting reaction mixture was warmed to room temperature. After stirring for 1 hr, the mixture was poured onto ice- water with vigorous stirring. The resulting white precipitate was collected by vacuum filtration and dried under reduced pressure to yield methyl 7-nitro-2,3-dihydrobenzo[6][l,4]dioxine-6- carboxylate (889 mg, 92percent). 1H NMR (DMSO-d6, 600 MHz) delta 7.64 (s, IH), 7.30 (s, IH), 4.41-4.38 (m, 4H), 3.80 (s, 3H); MS (ES+) m/z 240. 0 (M+H)+.

As the paragraph descriping shows that 20197-75-5 is playing an increasingly important role.

Reference£º
Patent; PRESIDENT AND FELLOWS OF HARVARD COLLEGE; WO2009/151561; (2009); A2;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

Simple exploration of 2879-20-1

2879-20-1 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone 76143, abenzodioxans compound, is more and more widely used in various.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.2879-20-1,1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone,as a common compound, the synthetic route is as follows.

General procedure: Equimolar quantities of substituted benzaldehyde and 1-(2H-1,3-benzodioxol-5-yl)ethan-1-one or 1-(2,3-dihydro-1,4-benzodioxin-6-yl)ethan-1-one were dissolved in 40% KOH and ethanol. The reactionmixture was then stirred for 10 h and poured into ice-cold water. Theprecipitated product was washed with water, dried, and recrystallizedfrom ethanol.

2879-20-1 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone 76143, abenzodioxans compound, is more and more widely used in various.

Reference£º
Article; Parambi, Della Grace Thomas; Oh, Jong Min; Baek, Seung Cheol; Lee, Jae Pil; Tondo, Anna Rita; Nicolotti, Orazio; Kim, Hoon; Mathew, Bijo; Bioorganic Chemistry; vol. 93; (2019);,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

Analyzing the synthesis route of 4442-53-9

The synthetic route of 4442-53-9 has been constantly updated, and we look forward to future research findings.

4442-53-9, 2,3-Dihydrobenzo[b][1,4]dioxine-5-carboxylic acid is a benzodioxans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Example 81a (S)-ethyl 4-amino-5-(2-(2,3-dihydrobenzo[b][1,4]dioxine-5-carboxamido)-propoxy)-2-methylquinoline-3-carboxylate Prepared as in Example 24a from (S)-ethyl 4-amino-5-(2-aminopropoxy)-2-methyl-quinoline-3-carboxylate (Example 26b) and 2,3-dihydrobenzo[b][1,4]dioxine-5-carboxylic acid as brown solid. MS 466 (MH+).

The synthetic route of 4442-53-9 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; SENOMYX, INC.; US2012/41078; (2012); A1;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

Analyzing the synthesis route of 2879-20-1

The synthetic route of 2879-20-1 has been constantly updated, and we look forward to future research findings.

2879-20-1, 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone is a benzodioxans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: Carbonyl substrate, 0.02 mol, was added in portions to a suspension of 0.01 mol NaBH4 in 0.3 mol of the corresponding alcohol solvent, and the mixture was stirred for 2-2.5 h at 20C. The resulting boron derivatives of benzyl alcohols were decomposed with 10% aqueous HCl (3.7 mL), and the mixture was stirred for a required time at a required temperature(see Tables 1-5), cooled, and poured into 200 mL of cold water. The products were extracted with diethylether (2 ¡Á 40 mL), the combined extracts were washed with water and dried over anhydrous sodium sulfate, the solvent was distilled off on a rotary evaporator, and the residue was analyzed by 1H NMR. If necessary,benzyl ethers were isolated by chromatography. Alcohol coreactants poorly soluble in water were removed from the diethyl ether extracts by vacuum distillation, and the target ethers ware isolated from the still residue. Ethers 2a [9], 2c [3], 2h, 4a [10], 4b [11], 4i,4l, 7e, 10c, 10d, 10e [4], and 13a [12] were described previously. Ethers 2b, 2d-2g, 2i, 4c-4h, 4j, 4k, 4m-4w, 7a-7d, 7f, 7g, and 13b-13f are mobile liquids, and 7h-7j, 10a, 10b, and 10f-10i are viscous liquids.

The synthetic route of 2879-20-1 has been constantly updated, and we look forward to future research findings.

Reference£º
Review; Mochalov; Fedotov; Trofimova; Zefirov; Russian Journal of Organic Chemistry; vol. 52; 4; (2016); p. 503 – 512; Zh. Org. Khim.; vol. 52; 4; (2016); p. 503 – 512,10;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

Simple exploration of 2879-20-1

2879-20-1 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone 76143, abenzodioxans compound, is more and more widely used in various.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.2879-20-1,1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone,as a common compound, the synthetic route is as follows.

General procedure: To 1-(2,3-dihydrobenzo[b][1,4]dioxin-6-yl)ethan-1-one(A) (1 mmol) alcohol solution (5 mL) was added substituted benzaldehyde(1 mmol). After dissolution, 50% NaOH (0.5 mL) was added. After confirming the completion of the reaction by thin layer chromatography, the sediment was filtered, washed with ethanol and dried to obtain chalcone

2879-20-1 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone 76143, abenzodioxans compound, is more and more widely used in various.

Reference£º
Article; Yang, Yu-Shun; Yang, Bing; Zou, Yan; Li, Guigen; Zhu, Hai-Liang; Bioorganic and Medicinal Chemistry; vol. 24; 13; (2016); p. 3052 – 3061;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

Brief introduction of 2879-20-1

The synthetic route of 2879-20-1 has been constantly updated, and we look forward to future research findings.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.2879-20-1,1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone,as a common compound, the synthetic route is as follows.

The specific steps are: Add compound 10 (0.5 mmol) to a 38 mL pressure tube. After iodine (0.25 mmol) and 2 mL of DMSO were subjected to a first reaction at 100 C for 90 min, 2-aminobenzonitrile (0.4 mmol) was added to the reaction mixture. KHS¡¤H2O (1 mmol) was subjected to a second reaction at 90 C, after 20 hours, The reaction mixture was extracted with ethyl acetate. The organic layer was washed with saturated sodium sulfate The solvent is distilled off under reduced pressure to obtain a crude product. Crude products with petroleum ether and ethyl acetateThe mixture is purified by column chromatography to obtain a yellow liquid. The total yield was 69%.

The synthetic route of 2879-20-1 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Central China Normal University; Geng Xiao; Wu Xia; Wu Yandong; Wu Anxin; (15 pag.)CN109232366; (2019); A;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

Some tips on 29668-44-8

29668-44-8 2,3-Dihydrobenzo[b][1,4]dioxine-6-carbaldehyde 248127, abenzodioxans compound, is more and more widely used in various.

29668-44-8, 2,3-Dihydrobenzo[b][1,4]dioxine-6-carbaldehyde is a benzodioxans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: To a suspension of aldehyde (30/35 mmol) in ethanol (50 mL) was added NH2OH*HCl (2 eq) and NaOH pellets (1.8 eq). The suspension was stirred at 80 C for 4 h and concentrated in vacuo. The crude product was extracted in EtOAc (200 mL). The organic layer was washed with 1 N HCl (2 200 mL), water (4 200 mL), dried (MgSO4) and concentrated in vacuo. If TLC showed impurities, the solid was washed with a minimum of cold Et2O to afford the aldoxime as a white powder.

29668-44-8 2,3-Dihydrobenzo[b][1,4]dioxine-6-carbaldehyde 248127, abenzodioxans compound, is more and more widely used in various.

Reference£º
Article; Goyard, David; Konya, Balint; Chajistamatiou, Aikaterini S.; Chrysina, Evangelia D.; Leroy, Jeremy; Balzarin, Sophie; Tournier, Michel; Tousch, Didier; Petit, Pierre; Duret, Cedric; Maurel, Patrick; Somsak, Laszlo; Docsa, Tibor; Gergely, Pal; Praly, Jean-Pierre; Azay-Milhau, Jacqueline; Vidal, Sebastien; European Journal of Medicinal Chemistry; vol. 108; (2016); p. 444 – 454;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

Downstream synthetic route of 17413-10-4

As the paragraph descriping shows that 17413-10-4 is playing an increasingly important role.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.17413-10-4,(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)methanamine,as a common compound, the synthetic route is as follows.

Example-8Preparation of 2,3-dihydro-benzo[1,4]dioxin-6-yl-methylamine hydrochloride 242.0 g of Methanolic ammonia [as 100% w/w by chemical assay] [Note: as chemical assay: 23.0% w/w, volume 1350.0 ml] and 30.0 g (0.183 mol) of 1,4-benzodioxan-6-carboxaldehyde were charged into a 2.0 L 4 necked round bottom flask, connect to a mechanical stirrer, thermo meter socket and condenser at 20-30 C. Stirred the mass for 20-30 min at 20-30 C. After dissolution is clear. Reaction mass was charged into a 2.0 L hydrogenator kettle at 20-30 C. 30.0 g of Raney Nickel (with Methanol dried) was charged under nitrogen atmosphere. Kettle was fitted to the hydrogenator. Nitrogen atmosphere was removed in Hydrogenator kettle with hydrogen gas by slowly flushing. Hydrogen gas was feeded upto 50-55 psi in hydrogenation kettle under oscillation. Maintained the hydrogen gas pressure (50-55 psi) till the hydrogen gas consumption is stopped. Reaction mass temperature was raised to 40-45 C. After hydrogen gas consumption is stooped at 45-50 C. Reaction mass temperature was cooled to 25-30 C. Maintained the hydrogen gas pressure at 50-55 psi for till the hydrogen gas consumption is stopped (about 90-120 min) Raney nickel was filtered through hyflow bed under nitrogen atmosphere. Raney Nickel was washed with 300.0 ml of methanol under nitrogen atmosphere. Filterate was collected into a flask. Methanol was distilled completely under vacuum at mass temperature not crossing 55 C. Mass temperature was cooled to 40-45 C. and release the vacuum. 50.0 ml of isopropyl alcohol was added. Reaction mass pH was adjusted to 0.5+/-0.25 with IPA HCl. Maintained the mass temperature at 25-30 C. for 60-90 min under stirring. Solid was filtered and solid was washed with 20.0 ml of isopropyl alcohol. Compound was dried under vacuum at 40+/-5 C. Dry compound weight: 31.0 g (yield: 84.1%).Spectral data:FT-IR (K Br) (cm-1): 3447.6, 2977.6, 2870.0, 1594.5, 1506.6, 1474.0, 1285.8, 1077.7, 1051. 735.2, 617.9, 472.0MS: 202.6 [M+1]

As the paragraph descriping shows that 17413-10-4 is playing an increasingly important role.

Reference£º
Patent; Natco Pharma Limited; US2010/298351; (2010); A1;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

Brief introduction of 4442-54-0

The synthetic route of 4442-54-0 has been constantly updated, and we look forward to future research findings.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.4442-54-0,2,3-Dihydro-1,4-benzodioxine-6-carboxylic acid,as a common compound, the synthetic route is as follows.

Oxalyl chloride (10 mL) is added to 2,3-dihydro-benzo[1 ,4]dioxine-6-carboxylic acid (14.9 g) dissolved in dichloromethane (100 mL). After the addition of N,N-dimethylformamide (0.5 ml_), the mixture is stirred at room temperature overnight and then concentrated. The residue is taken up in dichloromethane (100 ml.) and added to a mixture of nortropinone hydrochloride (10.0 g) and potassium carbonate (12.0 g) in dichloromethane (50 ml_). Then, pyridine (18 ml.) is added and the mixture is stirred at room temperature overnight. The mixture is concentrated and the residue is taken up in dichloromethane and washed with 1 M aqueous hydrochloric acid, 1 M aqueous NaOH solution, and brine. After drying (Na2SO4), the solvent is removed under reduced pressure to yield the title compound. Yield: 17.3 g (75percent of theory) Mass spectrum (ESI+): m/z = 288 [M+H]+

The synthetic route of 4442-54-0 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; ECKHARDT, Matthias; HAMILTON, Bradford, S.; HIMMELSBACH, Frank; PETERS, Stefan; WO2010/23161; (2010); A1;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem